Site Information

 Loading... Please wait...
  •  outer carbon fiber inlet attached to the Inner Headlight Duct
  • Inner Headlight Duct attached to the outer carbon fiber inlet
  • Inner Headlight Duct
  • Inner Headlight Duct
  • Inner Headlight Duct
  • 6OVRCRST Carbon Fiber Headlight Intake installed on an 06 spec b legacy
  • 6OVRCRST Carbon Fiber Headlight Intake installed on an 06 spec b legacy
  • 6OVRCRST Carbon Fiber Headlight Intake installed on an 06 spec b legacy
  • Hardware and bulbs will need to be taken out. Then put the entire headlight assembly in the oven for 5 min at 350 degrees. This will heat up the adhesive enough to take apart.
  • Once the the headlight assembly is taken apart, the reflector trim will need to come out and modified. The top is the original and the bottom is modified.
  • Modified reflector trim
  • Modified reflector trim
  • Once the reflector trim is modified it can then be reinstalled
  • You will need to trim the rubber boot on the back side of the headlight. We cut off the small inner ring only to keep it as tight as possible
  • Modified rubber boot installed
  • Now place the inner plastic air duct through the rubber boot
  • Now place the template sticker included with the kit on the lens of the headlight and trim out the hole. Check fitment and install. We used a
  • 6OVRCRST Carbon Fiber Headlight Intake installed on a customers outback
  • 6OVRCRST Carbon Fiber Headlight Intake installed on a customers outback
  • 6OVRCRST Carbon Fiber Headlight Intake installed on a customers outback

6OVRCRST Carbon Fiber Headlight Intake - Subaru Legacy 2004-2007

$185.00
SKU:
608.268.A01.R01
Availability:
2-3 Weeks if not in stock
Quantity:

Product Description

Our Carbon Fiber Headlight Air Intake is designed to feed air directly into your intake or your turbocharger. Made with carbon fiber sheets and vacuum infused resin. Absolutely zero fiberglass. 3D scanning of the legacy headlight ensures great fitment and curvature to the headlight lens. The inner assembly is made of a high heat plastic that will draw air directly to the air box or turbocharger. 

 

 

Modification to the headlight is required for fitment. 

 

 

FEATURES:

  • 4 layers of pure Carbon Fiber. (Absolutely no fiberglass)
  • Sprayed in a satin finish
  • Inner tubing included to direct the air through the headlight 
  • Template included for trimming the outer lens 

 

Note: Please allow 1-2 weeks for this product to be manufactured if not in stock. 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the 6OVRCRST Carbon Fiber Headlight Intake - Subaru Legacy 2004-2007 to your wish list.